<< Back

ISO 1478 - 1999 Tapping Screws Thread

Message Error Correction 中文版
螺纹
ST 1.5 ST 1.9 ST 2.2 ST 2.6 ST 2.9 ST 3.3 ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5 ST 6.3 ST 8 ST 9.5
螺距
d1 / 最大值
d1 / 最小值
d2 / 最大值
d2 / 最小值
d3 / 最大值
d3 / 最小值
c / 最大值
r ≈
y / Type C
y / Type F
y / Type R
编号
0.50 0.60 0.80 0.90 1.10 1.30 1.30 1.30 1.40 1.60 1.80 1.80 2.10 2.10
1.52 1.90 2.24 2.57 2.90 3.30 3.53 3.91 4.22 4.8 5.46 6.25 8 9.65
1.38 1.76 2.10 2.43 2.76 3.12 3.35 3.73 4.04 4.62 5.28 6.03 7.78 9.43
0.91 1.24 1.63 1.90 2.18 2.39 2.64 2.92 3.1 3.58 4.17 4.88 6.2 7.85
0.84 1.17 1.52 1.80 2.08 2.29 2.51 2.77 2.95 3.43 3.99 4.7 5.99 7.59
0.79 1.12 1.47 1.73 2.01 2.21 2.41 2.67 2.84 3.3 3.86 4.55 5.84 7.44
0.69 1.02 1.37 1.60 1.88 2.08 2.26 2.51 2.69 3.12 3.68 4.34 5.64 7.24
0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.1 0.1 0.15 0.15 0.15 0.15 0.15
- - - - - - 0.50 0.6 0.6 0.7 0.8 0.9 1.1 1.4
1.40 1.60 2.00 2.30 2.60 3.00 3.20 3.5 3.7 4.3 5 6 7.5 8
1.10 1.20 1.60 1.80 2.10 2.50 2.50 2.7 2.8 3.2 3.6 3.6 4.2 4.2
- - - - - - 2.70 3 3.2 3.6 4.3 5 6.3 -
0 1 2 3 4 5 6 7 8 10 12 14 16 20

I want to purchase I can supply
Similar Products & Suppliers
Locking threads with 30 degree wedge ramp

GB /T 37462 - 2019

Locking threads with 30 degree wedge ramp

Miniature screw threads : Profiles , general plan and basic dimensions

GB /T 15054.1 - 2018

Miniature screw threads : Profiles , general plan and basic dimensions

General purpose metric screw threads - Tolerances

GB /T 197 - 2018

General purpose metric screw threads - Tolerances

The blank diameters for rolling general purpose metric screw threads

GB /T 18685 - 2017

The blank diameters for rolling general purpose metric screw threads

GB /T 12716 - 2011
Dryseal pipe threads with the thread angle of 60 degrees

GB /T 27944 - 2011

Dryseal pipe threads with the thread angle of 60 degrees

Internal thread for wire thread inserts

GB /T 24425.5 - 2009

Internal thread for wire thread inserts

Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles

GB /T 13576.1 - 2008

Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles

Metric threads where pressure-tight joints are made on the threads

GB /T 1415 - 2008

Metric threads where pressure-tight joints are made on the threads

General purpose metric screw threads - Limits of sizes

GB /T 15756 - 2008

General purpose metric screw threads - Limits of sizes

Unified screw threads - General plan

GB /T 20670 - 2006

Unified screw threads - General plan

Trapezoidal screw threads - Part 1: Profiles

GB /T 5796.1 - 2005

Trapezoidal screw threads - Part 1: Profiles

General purpose metric screw threads - The plan for pipe systems

GB /T 1414 - 2003

General purpose metric screw threads - The plan for pipe systems

General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）

GB /T 192 - 2003

General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）

General purpose metric screw threads - Basic dimenslons

GB /T 196 - 2003

General purpose metric screw threads - Basic dimenslons

General purpose metric screw threads - Limit deviations

GB /T 2516 - 2003

General purpose metric screw threads - Limit deviations

General purpose metric screw threads - Preferable plan

GB /T 9144 - 2003

General purpose metric screw threads - Preferable plan

General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan

GB /T 9145 - 2003

General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan

General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan

GB /T 9146 - 2003

General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan

Tapping screws thread

GB /T 5280 - 2002

Tapping screws thread

Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads

GB /T 7307 - 2001

Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）

GB /T 7306.1 - 2000

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）

GB /T 7306.2 - 2000

Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）

The interference-fit threads

GB /T 1181 - 1998

The interference-fit threads

Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)

GB /T 3 - 1997

Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)

The threads for transition fit

GB 1167 - 1996

The threads for transition fit

Pipe threads where pressure-tight joints are made on the threads

GB 7306 - 1987

Pipe threads where pressure-tight joints are made on the threads

Screws thread shanks for thread forming screw-Metric coarse thread series

GB /T 6559 - 1986

Screws thread shanks for thread forming screw-Metric coarse thread series

Specification for wood screws

GB /T 922 - 1986

Specification for wood screws

Metric triangle lock with thread end

IFI 502 - 1982

Metric triangle lock with thread end

Metric Self-tapping Thread End

IFI 502 - 1982

Metric Self-tapping Thread End

Whitworth pipe threads for pipe unions

DIN 3858 - 2005

Whitworth pipe threads for pipe unions

Plastic threads

DIN 7505 - 1986

Plastic threads

Threads and thread ends for tapping screws

DIN 7970 - 1984

Threads and thread ends for tapping screws

ISO - Metric Trapezoidal Screw Threads

DIN 103 - 1 - 1977

ISO - Metric Trapezoidal Screw Threads

Thread and thread ends for wood screws

DIN 7998 - 1975

Thread and thread ends for wood screws

Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits

DIN 2510-2 - 1971

Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits

Aerospace - Lead and runout threads - Part 1: Rolled external threads

ISO 3353-1 - 2020

Aerospace - Lead and runout threads - Part 1: Rolled external threads

ISO metric trapezoidal screw threads - Basic and design profiles

ISO 2901 - 2016

ISO metric trapezoidal screw threads - Basic and design profiles

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

ISO 965-1 - 2013

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths

ISO 888 - 2012

Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths

ISO inch screw threads─Basic dimensions

ISO 725 - 2009

ISO inch screw threads─Basic dimensions

Pipe threads where pressure-tight joints are not made on the threads

ISO 228-1 - 2000

Pipe threads where pressure-tight joints are not made on the threads

ISO general purpose metric screw threads - General plan

ISO 261 - 1998

ISO general purpose metric screw threads - General plan

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

ISO 262 - 1998

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

Limits of sizes for general purpose external and internal screw threads

ISO 965-2 - 1998

Limits of sizes for general purpose external and internal screw threads

Deviations for constructional screw threads

ISO 965-3 - 1998

Deviations for constructional screw threads

ISO general-purpose metric screw threads─Basic dimensions

ISO 724 - 1993

ISO general-purpose metric screw threads─Basic dimensions

Tapping Screw Threads and Ends

JIS B 1125 (1) - 2015

Tapping Screw Threads and Ends

Limit gauges for metric screw threads

JIS B 0251 - 2008

Limit gauges for metric screw threads

Tapping screw threads and ends

JIS B 1125 (1) - 2003

Tapping screw threads and ends

Limits of sizes and tolerances for metric coarse screw threads

JIS B 0209 - 1997

Limits of sizes and tolerances for metric coarse screw threads

Tapping Screw Threads and Ends

JIS B 1125 (1) - 1995

Tapping Screw Threads and Ends

Locking Thread with 30° wedge ramp

JB /T 10971 - 2010

Locking Thread with 30° wedge ramp

Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws

ASME/ANSI B 18.6.3 (T40) - 2013

Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

ASME/ANSI B 18.6.3 (T41) - 2013

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

ASME/ANSI B 18.6.3 (T42) - 2013

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

ASME/ANSI B 18.6.3 (T46) - 2013

Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws

ASME/ANSI B 18.6.3 (T47) - 2013

Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws

Lag screw threads

ASME/ANSI B 18.2.1 - 2010

Lag screw threads

AB self-tapping teeth

ASME/ANSI B 18.6.3 - 2010

AB self-tapping teeth

self-tapping teeth-B

ASME/ANSI B 18.6.3 - 2010

self-tapping teeth-B

Self-tapping teeth-BF

ASME/ANSI B 18.6.3 - 2010

Self-tapping teeth-BF

Triangle lock self-tapping teeth--D、F、G

ASME/ANSI B 18.6.3 - 2010

Triangle lock self-tapping teeth--D、F、G

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010

ASME/ANSI B 18.6.3 - 2010
Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)

ASME/ANSI B 18.31.3 - 2009

Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)

Wood thread

ASME/ANSI B 18.6.1 - 1997

Wood thread

Wood thread

ASME/ANSI B 18.6.1 - 1981

Wood thread

Thread and body dimeters for wood screws

ASME/ANSI B 18.6.1 - 1981 (R2016)

Thread and body dimeters for wood screws

EN 60423 - 2007
Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation

EN 10226-1 - 2004

Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation

UNI 9702 - 1990
US triangle lock thread-S type

YJT 1025 - 2012

US triangle lock thread-S type

Metric triangle lock thread-S type

YJT 1026 - 2012

Metric triangle lock thread-S type

Metric triangle lock thread-C type

YJT 1027 - 2012

Metric triangle lock thread-C type

Metric triangle lock thread-B type

YJT 1028 - 2012

Metric triangle lock thread-B type

Metric triangle lock thread-P type

YJT 1029 - 2012

Metric triangle lock thread-P type

Thread and point details for Type Y thread cutting screws [TABLE 6]

BS 4174 - 1972

Thread and point details for Type Y thread cutting screws [TABLE 6]

Thread and point details for Type A threads [TABLE 23]

BS 4174 - 1972

Thread and point details for Type A threads [TABLE 23]

Screw Threads - UNJ Profile, Inch

SAE AS 8879 - 2001

Screw Threads - UNJ Profile, Inch

Tapping thread for nylon lock

QC /T 713 - 2004

Tapping thread for nylon lock

Screw Threads for Thread Forming Tapping Screws - Dimensions

IS 5957 - 2003

Screw Threads for Thread Forming Tapping Screws - Dimensions

ISO general purpose metric screw threads - General plan

IS 4218 (-2) - 2001

ISO general purpose metric screw threads - General plan

Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws

ASME B 18.6.3 (T4.3.1-1) - 2024

Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws

Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws

ASME B 18.6.3 (T4.3.2.1) - 2024

Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws

Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.1-1) - 2024

Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.2-1) - 2024

Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

ASME B 18.6.3 (T4.1.1.4-1) - 2024

Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws

Type AB, Thread Forming Tapping Screws [Table 5]

ASME B 18.6.4 (AB) - 1998 (R2005)

Type AB, Thread Forming Tapping Screws [Table 5]

Type B and BP, Thread Forming Tapping Screws [Table 6]

ASME B 18.6.4 (B/BP) - 1998 (R2005)

Type B and BP, Thread Forming Tapping Screws [Table 6]

Type A, Thread Forming Tapping Screws [Table E1]

ASME B 18.6.4 (A) - 1998 (R2005)

Type A, Thread Forming Tapping Screws [Table E1]

Typ C, Thread Forming Tapping Screws [Table V1]

ASME B 18.6.4 (C) - 1998 (R2005)

Typ C, Thread Forming Tapping Screws [Table V1]

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows