ISO 4766 - 2011 Slotted Set Screws With Flat Point

Unit: 毫米(mm)

Thread Size
d

M1.2

M1.6

①,The 120° angle is mandatory for L≤L0.

Equivalent standard

GB	GB /T 73
ISO	ISO 4766
DIN	DIN EN 24766
EN	EN 24766
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

Slotted Set Screws with Flat Point
Suppliers(1)

Slotted Set Screws with Flat Point
Suppliers(1)

Slotted set screws with flat point

Slotted set screws with flat point

Slotted Set Screws with Flat Point

Slotted screws with flat point

Slotted flat point set screws

Slotted set screws with flat point [Table 5] (A307, SAE J429, F468, F593)

Slotted Set Screws With Flat Point

Slotted Set Screws With Flat Point

Slotted Set Screws With Flat Point

Slotted Set Screws With Flat Point

Slotted set screws with flat point