DIN 551 - 1986 Slotted set screws with flat point

Unit: 毫米(mm)

Thread Size
d

M1.2

M1.4

P	Pitch
d_p	max=nominal size
d_p	min
n	Nominal Size
	min
	max
t	min=nominal size
t	max
L₀ ^①	Nominal Size

0.25	0.25	0.3
0.5	0.6	0.7
0.25	0.35	0.45
0.2	0.2	0.2
0.26	0.26	0.26
0.4	0.4	0.4
0.4	0.4	0.48
0.52	0.52	0.63
/	/	/

per 1000 units ≈ kg(7.85kg/cm3)

①,The 120° angle is mandatory for L≤L0.
②,Material: a) Steel, Property class (material): 14H 22H DIN ISO 898-5; b) Stainless steel, Strength class (material): A1-50 ISO 3506, DIN 267-11; c) Non-ferrous metal, Strength class (material): CuZn=CU2 or CU3 DIN 267-18 at the choice of the manufacturer d) Other strength classes or materials or a certain type of material, by agreement.

Equivalent standard

GB	GB /T 73
ISO	ISO 4766
DIN	DIN EN 24766
EN	EN 24766
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

GB /T 73 - 2017

Slotted Set Screws with Flat Point
Suppliers(1)

GB /T 73 - 1985

Slotted Set Screws with Flat Point
Suppliers(1)

ISO 4766 - 2011

Slotted Set Screws With Flat Point

ISO 4766 - 1983

Slotted set screws with flat point

JIS B 1117 (T2) - 2010

Slotted Set Screws with Flat Point

JIS B 1117 (T1) - 1995

Slotted screws with flat point

Q 282

Slotted flat point set screws

ASME/ANSI B 18.6.2 - 1998 (R2010)

Slotted set screws with flat point [Table 5] (A307, SAE J429, F468, F593)

EN 24766 - 1992

Slotted Set Screws With Flat Point

NF E 25-160 - 1992 (R2002)

Slotted Set Screws With Flat Point

CNS 4478 - 1981

Slotted Set Screws With Flat Point

DIN EN 24766 - 1992

Slotted Set Screws With Flat Point

QJ 2375 - 1992

Slotted set screws with flat point