DIN EN 24766 - 1992 Slotted Set Screws With Flat Point

Unit: 毫米(mm)

Thread Size
d

M1.2

M1.6

P	Pitch
d_p	min
d_p	max
n	Nominal Size
	min
	max
t	min
t	max
L₀ ^①	Nominal Size

0.25	0.35	0.4
0.35	0.55	0.75
0.6	0.8	1
0.2	0.25	0.25
0.26	0.31	0.31
0.4	0.45	0.45
0.4	0.56	0.64
0.52	0.74	0.84
/	2	2.5

per 1000 units ≈ kg(7.85kg/cm3)

①,The 120° angle is mandatory for L≤L0.
②,Material: a) Steel, Property class: 14H 22H DIN ISO 898-5; b) Stainless steel, Property class: A1-50 ISO 3506； c) Non-ferrous metal, Property class: will be covered in a future international Standard.

Equivalent standard

GB	GB /T 73
ISO	ISO 4766
DIN	DIN EN 24766
EN	EN 24766
Some of the above standards may be approximate equivalent. If there is any objection, the standard original shall prevail.

GB /T 73 - 2017

Slotted Set Screws with Flat Point
Suppliers(1)

GB /T 73 - 1985

Slotted Set Screws with Flat Point
Suppliers(1)

DIN 551 - 1986

Slotted set screws with flat point

ISO 4766 - 2011

Slotted Set Screws With Flat Point

ISO 4766 - 1983

Slotted set screws with flat point

JIS B 1117 (T2) - 2010

Slotted Set Screws with Flat Point

JIS B 1117 (T1) - 1995

Slotted screws with flat point

Q 282

Slotted flat point set screws

ASME/ANSI B 18.6.2 - 1998 (R2010)

Slotted set screws with flat point [Table 5] (A307, SAE J429, F468, F593)

EN 24766 - 1992

Slotted Set Screws With Flat Point

NF E 25-160 - 1992 (R2002)

Slotted Set Screws With Flat Point

CNS 4478 - 1981

Slotted Set Screws With Flat Point

QJ 2375 - 1992

Slotted set screws with flat point