<< Back

ASME/ANSI B 18.6.3 - 2010

美标ASME/ANSI B18.6.3 - 2010 ASME/ANSI18.6 球面圆柱头螺钉用十字槽
 球面圆柱头螺钉用十字槽

I want to purchase I can supply
Similar Products & Suppliers
Taper keys of keyways

GB /T 1563 - 2017

Taper keys of keyways

Hexalobular internal driving feature for bolts and screws

GB /T 6188 - 2017

Hexalobular internal driving feature for bolts and screws

Fasteners-Ends of parts with external thread(ISO 4753:2011, MOD)

GB /T 2 - 2016

Fasteners-Ends of parts with external thread(ISO 4753:2011, MOD)

Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD)

GB /T 3106 - 2016

Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD)

Countersinks for countersunk head screws

GB /T 152.2 - 2014

Countersinks for countersunk head screws

Connections with waisted stud - Tape classification

GB /T 13807.1 - 2008

Connections with waisted stud - Tape classification

Flared couplings - Flared end

GB /T 5652 - 2008

Flared couplings - Flared end

Hexalobular internal driving feature  for bolts and screws

GB /T 6188 - 2008

Hexalobular internal driving feature for bolts and screws

Knurl

GB /T 6403.3 - 2008

Knurl

Drill diameter for use prior to tapping screw threads

GB /T 20330 - 2006

Drill diameter for use prior to tapping screw threads

Square and rectangular keyways

GB /T 1095 - 2003

Square and rectangular keyways

Woodruff keyways

GB /T 1098 - 2003

Woodruff keyways

General purpose bolts and screws - Radius under the head

GB /T 3105 - 2002

General purpose bolts and screws - Radius under the head

Center holes

GB /T 145 - 2001

Center holes

Rivet shank diameters (except blind rivets)【ISO 1051:1999】

GB 18194 - 2000

Rivet shank diameters (except blind rivets)【ISO 1051:1999】

Stress area and bearing area for threaded fasteners

GB /T 16823.1 - 1997

Stress area and bearing area for threaded fasteners

Countersunk flat head screws - Part2: Penetration depth of cross recesses

GB /T 5279.2 - 1997

Countersunk flat head screws - Part2: Penetration depth of cross recesses

Offset cruciform recess fro rotary fastening devices

GB /T 12520 - 1990

Offset cruciform recess fro rotary fastening devices

Clearance holes for rivets

GB 152.1 - 1988

Clearance holes for rivets

Hot-rolled channel steel

GB 707 - 1988

Hot-rolled channel steel

Hexagon lobuar for fasteners - Type E

GB 6189 - 1986

Hexagon lobuar for fasteners - Type E

Fasteners - Clearanc holes for bolts and screws

GB 5277 - 1985

Fasteners - Clearanc holes for bolts and screws

Fasteners - Split pin holes and wire holes (ISO 7378:1983)

GB 5278 - 1985

Fasteners - Split pin holes and wire holes (ISO 7378:1983)

Countersunk head screws - Head configuration and gauging

GB /T 5279 - 1985

Countersunk head screws - Head configuration and gauging

Cross recesses for screws

GB 944.1 - 1985

Cross recesses for screws

Fastners - Widths across flats of hexagon products

GB 3104 - 1982

Fastners - Widths across flats of hexagon products

GB 3105 - 1982 (R1988)

Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters

DIN 7500 (-2) - 2016

Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters

Thread run-outs and thread undercuts

DIN 76-1 - 2016

Thread run-outs and thread undercuts

Tapping screw connections - Guideline values for core hole diameters and use

DIN 7975 - 2016

Tapping screw connections - Guideline values for core hole diameters and use

12 point socket for bolts and screws

DIN 34824 - 2007

12 point socket for bolts and screws

60° centre holes - Types R. A. B. and C

DIN 332 (-1) - 1986

60° centre holes - Types R. A. B. and C

Thread rolling screws for ISO metric thread guidelinge values for hole diameters

DIN 7500-2 - 1984

Thread rolling screws for ISO metric thread guidelinge values for hole diameters

Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13

DIN 78 - 1983

Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13

Knurle

DIN 82 - 1973

Knurle

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring

ISO 6149-1 - 2022

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring

Hexalobular internal driving feature for bolts and screws

ISO 10664 - 2014

Hexalobular internal driving feature for bolts and screws

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports

ISO 1179-1 - 2013

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports

Dimensioning and indication of knurling

ISO 13444 - 2012

Dimensioning and indication of knurling

Fasteners—Ends of parts with external ISO metric thread

ISO 4753 - 2011

Fasteners—Ends of parts with external ISO metric thread

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)

ISO 1179-4 - 2007

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)

Hexalobular internal driving feature for bolts and screws

ISO 10664 - 2005

Hexalobular internal driving feature for bolts and screws

Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation

ISO 1302 - 2002

Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation

General purpose bolts and screws─Metric series─Radii under the head

ISO 885 - 2000

General purpose bolts and screws─Metric series─Radii under the head

Rivet shank diameters

ISO 1051 - 1999

Rivet shank diameters

Aerospace - Spline drives - Wrenching configuration - Metric series

ISO 7403 - 1998

Aerospace - Spline drives - Wrenching configuration - Metric series

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports

ISO 9974-1 - 1996

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E)

ISO 9974-2 - 1996

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E)

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)

ISO 9974-3 - 1996

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)

Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends

ISO 11926-3 - 1995

Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends

Fasteners—Surface discontinuities— Part2:Nuts

ISO 6157-2 - 1995

Fasteners—Surface discontinuities— Part2:Nuts

Countersunk flat hed screws—Part 2:Penetration depth of cross recesses

ISO 7721-2 - 1990

Countersunk flat hed screws—Part 2:Penetration depth of cross recesses

Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements

ISO 6157-1 - 1988

Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements

Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements

ISO 6157-3 - 1988

Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements

Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series

ISO 7994 - 1985

Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series

Fasteners—Thread undercuts for external metric ISO

ISO 4755 - 1983

Fasteners—Thread undercuts for external metric ISO

Cross recessed-H type

ISO 4757 - 1983

Cross recessed-H type

Cross recessed-Z type

ISO 4757 - 1983

Cross recessed-Z type

Countersunk head screws—Head configuration and guaging

ISO 7721 - 1983

Countersunk head screws—Head configuration and guaging

Fasteners—Hexagon products—Widths across flats

ISO 272 - 1982

Fasteners—Hexagon products—Widths across flats

Fasteners─Clearance holes for bolts and screws

ISO 273 - 1979

Fasteners─Clearance holes for bolts and screws

Thread run-out for fasteners with thread in accordance with ISO 261 and ISO 262

ISO 3508 - 1976

Thread run-out for fasteners with thread in accordance with ISO 261 and ISO 262

Copper tubes of circular section - Dimensions

ISO 274 - 1975

Copper tubes of circular section - Dimensions

Hexalobular internal driving feature for bolts and screws

JIS B 1015 - 2018

Hexalobular internal driving feature for bolts and screws

General purpose bolts and screws - Metric series -- Radii under the head

JIS B 1005 - 2003

General purpose bolts and screws - Metric series -- Radii under the head

Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection

JIS B 1603 - 1995

Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection

Knurling

JIS B 0951 - 1962

Knurling

Automatic Cold Header - Hole Size

JB /T 4024 - 2014

Automatic Cold Header - Hole Size

JB /ZQ 4247 - 2006

JB /T 6960 - 1993

Recess Dimensions for Flat 82° Countersunk Head Screws

ASME/ANSI B 18.6.3 (T2) - 2013

Recess Dimensions for Flat 82° Countersunk Head Screws

Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws

ASME/ANSI B 18.6.3 (T43) - 2013

Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws

Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws

ASME/ANSI B 18.6.3 (T44) - 2013

Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws

Dimensions of Type TRS Tapping Screws

ASME/ANSI B 18.6.3 (T45) - 2013

Dimensions of Type TRS Tapping Screws

Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws

ASME/ANSI B 18.6.3 (T48) - 2013

Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws

ASME/ANSI B 18.6.3 - 2010

Dimensions of Alternate Styles of Points for Thumb and Wing Screws

ASME/ANSI B 18.17 - 1968 (R1983)

Dimensions of Alternate Styles of Points for Thumb and Wing Screws

Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions

EN 10058 - 2018

Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions

Aerospace series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard

EN 3044 - 1998

Aerospace series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard

Countersunk head screws - Head configuration and gauging

EN 27721 - 1991

Countersunk head screws - Head configuration and gauging

Fasteners - Clearanc holes for bolts and screws

DIN EN 20273 - 1992

Fasteners - Clearanc holes for bolts and screws

Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws

ASME B 18.6.3 (T4.11.1-1) - 2024

Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws

Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws

ASME B 18.6.3 (T4.1.2.1-1) - 2024

Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws

Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws

ASME B 18.6.3 (T4.1.2.2-1) - 2024

Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws

Dimensions of Type TRS Tapping Screws

ASME B 18.6.3 (T4.1.3-1) - 2024

Dimensions of Type TRS Tapping Screws

Dimensions of Hexagon Sockets

ASME B 18.3 (Table 18) - 2012

Dimensions of Hexagon Sockets

Body and grip lengths for socket head cap screws

ASME B 18.3 (Table 4) - 2012

Body and grip lengths for socket head cap screws

Metic threads and points for tapping screws

ASME B 18.6.5M - 2000 (R2010)

Metic threads and points for tapping screws

Type BF and BT, Thread Cutting Tapping Screws  [Table 7]

ASME B 18.6.4 (BF/BT) - 1998 (R2005)

Type BF and BT, Thread Cutting Tapping Screws [Table 7]

Type D,F,G and Type T Thread Cutting Tapping Screws  [Table 8]

ASME B 18.6.4 (D/F/G/T) - 1998 (R2005)

Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8]

QJ 2920 - 1997

Aerospace series - Six lobe recess - Dimensions and tolerances

BS EN 3911 - 2010

Aerospace series - Six lobe recess - Dimensions and tolerances

Threaded ends of fitting

BS EN 10241 (T6) - 2000

Threaded ends of fitting

按电脑端显示

长按二维码,关注易紧通微信公众号

Home

Products & Standards

Material Search

Tradeshows