会员中心 | English

方垫圈 CNS 155 - 1994

选择规格尺寸点击↓

(14)

(18)

(22)

(27)

(33)

(39)

括号内尺寸为非优选

尺寸单位: mm

扫一扫分享

单重计算公差

公称直径

(14)

(18)

(22)

(27)

(33)

(39)

d	最小值=公称
	最大值
s	小平垫	最大值=公称
		最小值
h	小平垫	公称
		最大值
		最小值
s	大平垫	最大值=公称
		最小值
h	大平垫	公称
		最大值
		最小值

6.6	9	11	14	16	18	20	22	24	26	30	33	36	39	42
7.2	9.6	11.7	14.7	16.7	18.7	20.8	22.8	24.8	26.8	30.8	34	37	40	43
17	23	28	35	40	45	52	56	64	68	73	-	-	-	-
15.9	21.7	26.7	33.4	38.4	43.4	50.1	54.1	62.1	66.1	71.1	-	-	-	-
1.2	1.6	1.6	2.3	3.2	3.2	4.5	4.5	4.5	6	6	-	-	-	-
1.4	1.8	1.8	2.6	3.6	3.6	5	5	5	6.7	6.7	-	-	-	-
1	1.4	1.4	2	2.8	2.8	4	4	4	5.3	5.3	-	-	-	-
20	26	32	40	44	52	55	62	68	72	80	90	100	110	115
18.7	24.7	30.4	38.4	42.4	50.1	53.1	60.1	66.1	70.1	78.1	87.8	97.8	107.8	112.8
2.3	2.3	2.3	3.2	3.2	4.5	4.5	6	6	6	6	6	8	8	8
2.6	2.6	2.6	3.6	3.6	5	5	6.7	6.7	6.7	6.7	6.7	8.7	8.7	8.7
2	2	2	2.8	2.8	4	4	5.3	5.3	5.3	5.3	5.3	7.3	7.3	7.3

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3103.3 - 2020

紧固件公差平垫圈

注：技术数据仅供参考，请以官方原件为准！

类似标准及供货信息

1	[国标] GB 852 - 1988	工字钢用方斜垫圈 Square Taper Washers For I Section 供应商(6)
2	[国标] GB /T 853 - 1988	槽钢用方斜垫圈 Square Taper Washers For Slot Section 供应商(11)
3	[德标] DIN 6319 (D) - 2001	D型锥面垫圈 Spherical Washers, Conical Seats - Type D 供应商(2)
4	[德标] DIN 434 - 2000	槽钢用方斜垫圈 Square Taper Washers For U-sections 供应商(10)
5	[德标] DIN 435 - 2000	I型工字钢用方斜垫圈 Square Taper Washers For Use With I Sections 供应商(6)
6	[德标] DIN 434 - 1990	槽钢用方斜垫圈 Square taper washers for use with channel sections 供应商(10)
7	[德标] DIN 436 - 1990	木结构用方形垫圈 Square Washers; Especially for Wood Constructions 供应商(9)
8	[德标] DIN 6918 - 1990	用于槽钢的钢结构高强度螺栓用方垫圈 Square Taper Washers For High-strength Structual Bolting Of Steel Channel Sections 供应商(2)
9	[德标] DIN 435 - 1989	I型工字钢用方斜垫圈 Square taper washers for use with 1 sections 供应商(6)
10	[德标] DIN 6917 - 1989	钢结构工字钢用高强度螺栓连接用方形垫圈 Square Taper Washers For High-Strength Structural Bolting Of Steel I Sections 供应商(2)
11	[日标] JIS B 1256 (SQ) - 2008	方形垫圈 [Table JA.1.] Square Washers [Table JA.1.] 供应商(2)
12	[日标] JIS B 1256 (SQ) - 1978	方形垫圈 Square Washers 供应商(2)
13	[机械行业] JB /ZQ 4337 - 2006	轻型工字钢用方斜垫圈 Square taper washers for I section-Light style 供应商(1)
14	[机械行业] JB /ZQ 4338 - 2006	轻型槽钢用方斜垫圈 Square taper washers for slot section-Light style
15	[机械行业] JB /ZQ 4338 - 1997	轻型槽钢用方斜垫圈 Square Taper Washers For Slot Section-Light Style
16	[美标] ASME/ANSI B 18.23.1 - 1967 (R1975)	方斜垫圈 (可锻铸铁/白口铁) [Type A] Square Beveled Washers (Malleable Iron) [Type A] 供应商(1)
17	[美标] ASME/ANSI B 18.23.1 - 1967 (R1975)	方斜垫圈 (钢制) [Type B] (ASTM F436) Square Beveled Washers (Steel) [Type B] 供应商(1)
18	[意大利] UNI 6598 - 2002	方斜垫圈(U型) Channel Clamping Plates For UNP Section (Inclination 8％)
19	[英标] BS 4395-1 - 1969	米制锥形方垫片 Metric Square Taper Washers
20	[英标] BS 3410 (-11) - 1961	带圆孔的粗制方垫片 [Table 11] Square Black Washers With Round Holes [Table 11]
21	[英标] BS 3410 (-12) - 1961	方形或D形斜垫圈 [Table 12] Square or D-shaped Taper Washers [Table 12]
22	[美标] ASTM F 436 - 2019	英制方斜垫圈和剪切方斜垫圈 Hardened Beveled Washers, Inch Washers 供应商(1)
23	[美标] ASTM F 436 - 2011	方斜垫圈和剪切方斜垫圈 Hardened Beveled Washers 供应商(1)
24	[美标] ASTM F 436 - 2010	工字钢用方斜垫圈 Square hardened beveled washers 供应商(1)
25	[美标] ASTM F 436M - 2019	米制方斜垫圈和剪切方斜垫圈 Metric Hardened Beveled Washers
26	[台湾] CNS 156 - 1994	带双槽槽钢用方斜垫圈 Square Taper Washers With Double Slots For Channel
27	[台湾] CNS 157 - 1994	带单槽工字钢用方斜垫圈 Square Taper Washers For 工 Steel With Single Slot
28	[台湾] CNS 4646 - 1983	钢结构高强度螺栓连接—单槽方斜垫圈 Square Taper Washers With Single Slot For High Strength Bolts Connection For Steel Structure
29	[台湾] CNS 4647 - 1983	高强度结构槽钢用方斜垫圈 Square Taper Washers For High Prestressed Channels
30	[韩标] KS B 1326 (T10) - 2021	方形平垫 Square Washers
31	[韩标] KS 1326 (T4) - 2009	方形平垫 Square Washers
32	[建筑] JG /T 5057.34 - 1995	建筑机械与设备工字钢用高强度方斜垫圈 Construction Machinery and Equipment - High Strength Square Taper Washers For 工 Section
33	[建筑] JG /T 5057.35 - 1995	建筑机械与设备槽钢用高强度方斜垫圈 Construction Machinery and Equipment - High Strength Square Taper Washers For Slot Section
34	[印标] IS 6649 (B / C) - 1985	栓接结构用平垫圈淬火并回火 - 方斜垫圈，B型（斜度6°，用于槽钢）和C型（斜度8°，用于工字钢） Square taper washers for use with channels (6° taper) Type B, and use with I-beams (8° taper) Type C
35	[印标] IS 5372 - 1975 (R2001)	锥形垫圈 Taper Washers For Channels ( ISMC )
36	[波兰标] PN 82018	双槽方斜垫圈 Double Groove Square Taper Washers
37	[美标] ASME B 18.2.6 - 2019	淬硬钢工字钢用方斜垫圈 [Table 5] (ASTM F436 / F436M) Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
38	[美标] ASME B 18.2.6 - 2010	淬硬钢工字钢用方斜垫圈 [Table 5] (ASTM F 436) Hardened Beveled Washers With Slope or Taper in Thickness 1:6 (ASTM F 436)
39	[美标] ASME B 18.2.6 - 2006	淬硬钢工字钢用方斜垫圈 (ASTM F 436) Hardened Beveled Washers With Slope Or Taper In Thichness 1:16 (ASTM F 436)