|
| No dimensional drawings!
Unit:
|
|
|
| No dimensional drawings!
Unit:
|
| 材料 | 热处理 | 表面处理 | |||
| 种类 | 牌号 | 标准编号 | |||
| 弹簧钢 | 70 | GB/T 4354 | GB/T 5222 | 淬火并回火 40 HRC ~ 50 HRC 或 392 HV ~ 513 HV | 氧化、磷化； 镀锌钝化按 GB/T 5267.1; 非电解锌片涂层按 GB/T 5267.2 |
65Mn 60Si2Mn | GB/T 1222 | ||||
| 不锈钢 | 30Cr13 0Cr18Ni9 0Cr18Ni10Ti 06Cr18Ni11Ti 06Cr17Ni12Mo2 | GB/T 1220 GB/T 4240 | 回火 ≥ 34 HRC 或 336 HV | 简单处理 | |
| 磷青铜 | QSi3-1 | GB/T 3114 | ≥ 90 HRB 或 192 HV | / | |
注1：垫圈电镀后，必须立即进行驱氢处理。
注2：热处理硬度供生产工艺参考。
| 规格 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 |
| 试验后的自由高度≥ | 0.9 | 1 | 1.25 | 1.6 | 2.1 | 2.4 | 2.8 | 3.2 | 3.8 | 3.8 | 4.4 | 4.4 | 5.6 | 5.6 | 8 |
（单位：毫米）
| 规格/mm | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 |
| 试验载荷/N | 700 | 1 160 | 1 760 | 3 050 | 5 050 | 7 050 | 12 900 | 20 600 |
| 规格/mm | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 27 |
| 试验载荷/N | 30 000 | 41 300 | 56 300 | 69 000 | 88 000 | 110 000 | 127 000 | 167 000 |
| 规格/mm | 30 | 33 | 36 | 39 | 42 | 45 | 48 | |
| 试验载荷/N | 204 000 | 255 000 | 298 000 | 343 000 | 394 000 | 457 000 | 518 000 |
Mechanical properties of fasteners - Stainless steel Bolts, screws and studs
Mechanical properties of fasteners-Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications
Mechanical properties of fasteners-Guidance for the selection of stainless steels and nickel alloys for fasteners
Mechanical Properties of Fasteners - Prevailing Torque Type Steel Nuts
Mechanical properties of fasteners-Set screws
Mechanical properties of fasteners-nuts with coarse thread
High-strength structural bolting assemblies for preloading - Part2: Suitability for preloading
Mechanical properties of fasteners - Stainless steel nuts
Mechanical properties of fasteners - Stainless steel set screws
Mechanical properties of fasteners - Stainless steel Bolts, screws and studs
Mechanical properties of fasteners-Bolts、screws and studs
Mechanical properties of fasteners Parts for bolted connections for use at temperatures from -200 ℃～+700 ℃
Mechanical properties of fasteners made of the fine grain non-heat treatment steel-Bolts,screws and studs
Mechanical properties of fasteners-Blind rivets
Mechanical properties of fasteners. Wing nuts with specified proof torque
Mechanical properties of fasteners-Drilling screws with tapping screws thread
Mechanical properties of fasteners. Prevailing torque type steel hexagon nuts
Mechanical properties of fasteners-Nuts-Fine pitch thread
Mechanical propretles of fasteners tapping screws
Mechanical properties of fasteners-Bolts、screws and studs made of stainless-steel
Machanical properties of fasteners-Thread rolling screws
Mechanical properties of fasteners Bolts,scrows,studs and nuts made of non-ferrous metals
Specification for revit
Mechanical Properties of Fasteners 一 Tapping Screws
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes
Heat treated tapping screws - Mechanical and physical properties
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes
Mechanical properties of corrosion-resistant stainless steel fasteners - Nuts with specified grades and property classes bsi.
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes
Mechanical Properties of Fasteners - Prevailing Torque Type Steel Nuts
Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1:Bolts,screws and studs with specified property classes. Coarse thread
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specifed property classes - Coarse thread and fne pitch thread
Mechanical properties—Set screw and similar threaded fasteners with specified hardness classes
Heat-treated steel tapping screws - Mechanical properties
Mechanical properties of corrosion resistant stainless steel fasteners—Part 1:Nuts
Mechanical properties of corrosion resistant stainless steel fasteners— Part 3:Set screws and similar fasteners not under tensile stress
Mechanical properties of corrosion resistant stainless steel fasteners— Part 4:Tapping screws
Drilling screws with tapping screw thread— Mechanical and functional properties
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread
Torsional test and minimum torques for bolts and screws
Mechanical properties of fasteners—Bolts,screws,studs and nuts made of non-ferrous metals
Heat-treated steel tapping screws - Mechanical properties
Test methods of tightening torque for bolts
Maximum Drive Torque for Type TRS Tapping Screws
Torsional Strength Requirements for Tapping Screws
Nylon Insert Locknuts (Inch Series)
Aerospace series - Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 900 MPa (at ambient temperature)/650℃ - Technical specification
Non-preloaded structural bolting assemblies - Part 1: General requirements
High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
Mechanical properties of fasteners - Part 2: Nuts with specified proof load values - Coarse thread
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread
Mechanical properties of fasteners - Part 1: Bolts, screws and studs
Mechanical Properties of Fasteners - Bolts, Screws, Studs and Nuts
Carbon Steel Bolts, Studs, and Threaded Rod 6000 PSI Tensile Strength
Carbon steels、alloy steels and stainless materials for bolts and nuts
Self-drilling screws for the building and construction industries Part 1: General requirements and mechanical properties
Thread Rolling Screws
Maximum Drive Torque for Type TRS Tapping Screws
Torsional Strength Requirements for Tapping Screws
