GB /T 3098.6 - 2023
Mechanical properties of fasteners - Stainless steel Bolts, screws and studs
GB /T 3098.24 - 2020
Mechanical properties of fasteners-Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications
GB /T 3098.25 - 2020
Mechanical properties of fasteners-Guidance for the selection of stainless steels and nickel alloys for fasteners
GB /T 3098.9 - 2020
Mechanical Properties of Fasteners - Prevailing Torque Type Steel Nuts
GB /T 3098.3 - 2016
Mechanical properties of fasteners-Set screws
GB /T 3098.2 - 2015
Mechanical properties of fasteners-nuts with coarse thread
GB /T 32076.2 - 2015
High-strength structural bolting assemblies for preloading - Part2: Suitability for preloading
GB /T 3098.15 - 2014
Mechanical properties of fasteners - Stainless steel nuts
GB /T 3098.16 - 2014
Mechanical properties of fasteners - Stainless steel set screws
GB /T 3098.21 - 2014
GB /T 3098.6 - 2014
Mechanical properties of fasteners - Stainless steel Bolts, screws and studs
GB /T 3098.1 - 2010
Mechanical properties of fasteners-Bolts、screws and studs
GB /T 3098.8 - 2010
Mechanical properties of fasteners Parts for bolted connections for use at temperatures from -200 ℃～+700 ℃
GB /T 3098.9 - 2010
GB /T 3098.22 - 2009
Mechanical properties of fasteners made of the fine grain non-heat treatment steel-Bolts,screws and studs
GB /T 94.1 - 2008
Spring washer technical conditions
GB /T 94.3 - 2008
GB /T 3098.19 - 2004
Mechanical properties of fasteners-Blind rivets
GB /T 3098.20 - 2004
Mechanical properties of fasteners. Wing nuts with specified proof torque
GB /T 3098.11 - 2002
Mechanical properties of fasteners-Drilling screws with tapping screws thread
GB /T 3098.9 - 2002
Mechanical properties of fasteners. Prevailing torque type steel hexagon nuts
GB /T 3098.4 - 2000
Mechanical properties of fasteners-Nuts-Fine pitch thread
GB /T 3098.5 - 2000
Mechanical propretles of fasteners tapping screws
GB /T 3098.6 - 2000
Mechanical properties of fasteners-Bolts、screws and studs made of stainless-steel
GB /T 3098.7 - 2000
Machanical properties of fasteners-Thread rolling screws
GB /T 3098.10 - 1993
Mechanical properties of fasteners Bolts,scrows,studs and nuts made of non-ferrous metals
GB /T 94.2 - 1987
GB /T 116 - 1986
Specification for revit
GB /T 3098.5 - 2016
Mechanical Properties of Fasteners 一 Tapping Screws
ISO 898 (-2) - 2022
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes
ISO 3506-2 - 2020
Mechanical properties of corrosion-resistant stainless steel fasteners - Nuts with specified grades and property classes bsi.
ISO 898 (-3) - 2018
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes
ISO 2320 - 2015
Mechanical Properties of Fasteners - Prevailing Torque Type Steel Nuts
ISO 898-1 - 2013
Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1:Bolts,screws and studs with specified property classes. Coarse thread
ISO 898-2 - 2012
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specifed property classes - Coarse thread and fne pitch thread
ISO 898-5 - 2012
Mechanical properties—Set screw and similar threaded fasteners with specified hardness classes
ISO 2702 - 2011
Heat-treated steel tapping screws—Mechanical properties
ISO 3506-2 - 2009
Mechanical properties of corrosion resistant stainless steel fasteners—Part 1:Nuts
ISO 3506-3 - 2009
Mechanical properties of corrosion resistant stainless steel fasteners— Part 3:Set screws and similar fasteners not under tensile stress
ISO 3506-4 - 2009
Mechanical properties of corrosion resistant stainless steel fasteners— Part 4:Tapping screws
ISO 10666 - 1999
Drilling screws with tapping screw thread— Mechanical and functional properties
ISO 7085 - 1999
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
ISO 898-6 - 1994
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread
ISO 898-7 - 1992
Torsional test and minimum torques for bolts and screws
ISO 8839 - 1986
Mechanical properties of fasteners—Bolts,screws,studs and nuts made of non-ferrous metals
JB /T 6040 - 2011
Test methods of tightening torque for bolts
JB 6688 - 1993
ASME/ANSI B 18.6.3 (T49) - 2013
Maximum Drive Torque for Type TRS Tapping Screws
ASME/ANSI B 18.6.3 (T50) - 2013
Torsional Strength Requirements for Tapping Screws
ASME/ANSI B 18.21.1 - 2009
ASME/ANSI B 18.21.1 - 2009
ASME/ANSI B 18.16.6 - 2008
Nylon Insert Locknuts (Inch Series)
EN 2576 - 2020
Aerospace series - Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 900 MPa (at ambient temperature)/650℃ - Technical specification
EN 15048-1 - 2016
Non-preloaded structural bolting assemblies - Part 1: General requirements
EN 14399-2 - 2015
High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
EN 20898-7 - 1995
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
EN 20898-2 - 1993
Mechanical properties of fasteners - Part 2: Nuts with specified proof load values - Coarse thread
EN 20898-6 - 1992
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread
EN 20898-1 - 1991
Mechanical properties of fasteners - Part 1: Bolts, screws and studs
EN 28839 - 1991
Mechanical Properties of Fasteners - Bolts, Screws, Studs and Nuts
ASTM A194/A194M - 2016
ASTM A 193/193M - 2015
ASTM A 453/453M - 2011
ASTM A 354 - 2011
ASTM A 325 - 2011
ASTM A 490 - 2011
ASTM A 574 - 2011
ASTM A 307 - 2010
Carbon Steel Bolts, Studs, and Threaded Rod 6000 PSI Tensile Strength
ASTM A 449 - 2010
ASTM A 563 - 2007
ASTM F 568M - 2007
ASTM F 835 - 2004
ASTM A 194 - 2000
Carbon steels、alloy steels and stainless materials for bolts and nuts
AS 3566.1 - 2002
Self-drilling screws for the building and construction industries Part 1: General requirements and mechanical properties
SAE J 995 - 2012
SAE J 933 - 2005
SAE J 81 - 1997
Thread Rolling Screws
ASME B 18.6.3 (T4.11.2-1) - 2024
Maximum Drive Torque for Type TRS Tapping Screws
ASME B 18.6.3 (T4.11.3-1) - 2024
Torsional Strength Requirements for Tapping Screws
